tensile strength, UTS)까지 힘을 받지 않아도 파괴되어 버리는 Fatigue 현상이 있다.
<그림 1> Mechanical Bonding Test1. Mechanical Bonding Test
기계적 강도 측정법(Mechanical Bonding Test)에는 크게 두 가지가 있는데 <그림 2>와 같이 Shear Test와 Pull Test가 있다. 현재 가장 흔히 쓰이는 방법은 Shear Test로 Solder를 PCB 기판에 접
force)-이 생기는가, 또 어떻게 변형(deformations) 하는가를 연구하는 응용역학의 한 분야.
2) 재료역학(mechanics of materials)
기계‧건축 등의 구조물을 이루는 재료를 연구대상으로 하는 공학의 기초 분야의 하나 로 물체에 작용하는 외력(external load)에 대해 물체내의 내력(internal force)과 변형률
Bonding Test를 실시하여 Sn-Pb Solder와 Pb-Free Solder 간의 차이를 확인하고 Pb-Free Solder중에서도 각 재료마다의 Mechanical Bonding Test를 실시하여 Bonding Force를 체크한다. 보통 Soldering 된 제품이 받는 Stress 는 Tensile Stress 보다는 Shear Stress 가 주요하기 때문에 Solder 선택 시에는 Solder의 Tensile Property 보다는 Shear Pr
1. Pump에서의 Cavitation (공동현상) 에 대하여 기술하고 이로 생길 수 있는 문제점과 그 방지책에 대해 논하시오
- Cavitation이란
유체가 넓은 유로에서 좁을 곳으로 고속 유입하거나 벽면의 요철, 만곡부 등으로 흐름이 직선적이지 못할 때 유체는 저압이 되고 포화증기압보다 낮아지면 기화되어 기포가
탄성률이 큰 것으로 보아 elastomer에 가깝다고 판단되었다.
1. INTRODUCTION
1.1 실험 목적
인장 및 굴곡 실험을 통해 고분자 재료의 인장강도(tensile stress), 인장변형률(tensile strain), 인장탄성률 (tensile modulus)을 구해보고, 각각의 기계적 물성값으로 나타내질 수 있는 재료의 고유한 특성에 대해 알아본다.
-Conclusion & Discussion
Poisson's ratio is derived by dividing the horizontal strain modulus by perpendicular strain modulus. Poisson's ratio is a characteristic value of materials, and concretes have 0.16∼0.22 of it. The Poisson's ratio from the first experiment is 0.18 and this is comprised in the range of theory, and the value from the second experiment is 0.16 which also comes under th
2.4. Bonjean Curve
많은 학생들이 Bonjean Curve 에 대해 답을 하지 못하였다고 하셨다. 우리 조원들도 이 문제에 대해 거의 답을 하지 못하였다고 했다. Bonjean Curve는 부력의 개념이다.
그림 Bonjean Curve
임의의 수선에서 횡단면의 면적은 Simpson's 1st Rule 같은 방법으로 구할 수 있고 이를 수선변화에 따른 곡
1. abstract
The purpose of this experiment is to measure the elasticity about the tensile force, the plastic deformation resistance and breaking strength of the materials through MTS.
And I analyzed the result and compared the theoretical and experimental values. Also, I contemplated these results why there is a difference between them.
2. 실험목적
재료를 잡아 당
The purpose of this experiment can draw the optimized design by measuring the tension tester that measure the elasticity about the tensile force, the plastic deformation resistance and breaking strength of the materials.
If we design safety, we should use the ductile material.
.
대부분의 구조물은 사용 중에 힘(하중)을 받게 된다. 그러므로 우선적으로 구조물재
forcing rod because is alkalinity is security
3) have excellent modeling.
4) ability that have high hardness and stand in shock of pedestrian or machine operation etc. is big.
On the other hand, shortcoming is
1) withstand to Apchukryeok, force that press, but is weak in tensility, force that pull.
2) because weight is high than strength, weight of building is heavy.
This is repletion f